Liberon Decking Oil

Up to 10m² per litre

Preparation:

• Ensure that decking is clean, dry and free from dust, dirt and any other surface contaminants prior to applying Liberon Decking Oil.
• Old 'coating' type products such as paints, varnishes and stains must be removed by stripping back to bare wood
• If sanding, use a 120-150 grit sandpaper and remove all traces of sanding dust
• Old wooden decking should be cleaned with Liberon Tough Deck Clean and Revive
• Sweep decking with a stiff broom or brush to remove all surface dirt and debris prior to oiling

Please note: Decking made from oily or resinous timbers such as Massaranduba, Bangkirai, Garapa, Larch and Douglas Fir usually require a period of 'weathering' prior to applying a decking treatment. Check the decking supplier / manufacturer's guidance on how long decking should be allowed to weather before applying a decking treatment.
 
Application:

• Always do a test area before starting any project, to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

-Softwood Decking:

• Stir well before and periodically during use.
• Apply a generous coat of Liberon Decking Oil with a good quality decking brush or microfibre roller
• Allow to penetrate for 15 to 30 minutes, then apply the second coat without waiting for the first to dry
• Apply further coats of decking oil, until the timber no longer absorbs the oil
• Wipe any excess with a lint-free cotton cloth
• Allow to dry for 24 before using the decking

-Hardwood Decking:

• For best results, apply the oil very thinly with a lint-free cloth
• It is essential that any excess oil on the surface is wiped off thoroughly with a clean cloth

Please note: The type and age of timber can have a dramatic impact on how much decking oil the wood needs. As an example, softwood decking that is old will likely require more oil than a relatively new hardwood decking that still retains a fair amount of natural oil.

To test how much oil your decking needs, apply one coat, then apply a droplet of oil in a corner. If the droplet of oil soaks into the wood then a further coat can be applied. Repeat this process until the droplet of oil sits as a bead on the surface of the wood and no longer soaks in to the timber. This is an indication that the timber has absorbed as much oil as possible and doesn't require any more.

 Clean equipment using white spirit.

Aftercare:

-Regular Cleaning:

• To preserve the look and performance of the oiled finish for longer, it is recommended that decked areas are swept with a stiff broom on a regular basis.
• This is to remove any loose leaves, dirt and other organic matter that can settle on the deck and in the grooves, which can degrade or damage the finish and decking timbers over time.

-Deep Cleaning:

• For heavily soiled decks or decking affected by mould, mildew and grime, clean with Liberon Tough Deck Clean and Revive.

-Maintenance:

• Apply 1 or 2 coats of Liberon Decking Oil once yearly as part of a routine maintenance schedule, to avoid decking finishes looking tired and worn.
• On high traffic areas, re-apply 1 or 2 coats of Decking Oil as and when required, following the Preparation and Application instructions above.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• A solvent-based decking oil that protects and revives most types of timber decking
• Also suitable for use on fences, sheds and hot tub surrounds
• Contains UV filters to help prevent fading from sunlight
• Can be brush, roller or spray applied
• Highly durable and water resistant
• Revives weathered and greying decking
• Enhances the natural beauty of the timber
• Very high V.O.C