Owatrol Dilunett Paint Remover 1 Litre

Clean up using water.

Coverage: 4m2 per litre.
Actual coverage will vary depending on application method, type, texture, age and porosity of the surface

Use a flat blade or a brush with synthetic (nylon) “bristles”.

Good application practice:

• Always carry out a preliminary test to determine the contact time required for stripping.
• Wear chemical resistant gloves, safety goggles and protective clothing.
• For best results on wood, do not let DILUNETT® work longer than required to dissolve the paint.
• Hardwoods, especially those rich in tannins (Teak, Oak, Sapele, Chestnut…) can turn dark if in prolonged contact with DILUNETT®.
• Where DILUNETT® has darkened the wood DO NOT allow it to dry, prior to using NET-TROL®*.
• Treat stripped wooden surfaces with NET-TROL®* to restore the woods original colour.
• Cover and protect everything you do not wish to strip, including plants and shrubs.
• Apply between 5°C and 35°C. Do not apply in direct sunlight or on a hot surface.
• Do not allow DILUNETT® to dry on the surface. If drying occurs dampen with mist application of water.
• Consult Owatrol for additional information and advice prior to using DILUNETT® on Oak and Chestnut.

Surface preparation:

• Remove any loose and flaking paint.
• Brush off any physical surface contamination i.e. moss, general dirt etc.

Application:

• Apply a thick coat of DILUNETT® over the whole surface to be stripped. For woods rich in tannins, work large areas in zones to avoid excessive darkening of the wood.
• Allow product to work.
• Remove DILUNETT® and dissolved paint with a stiff nylon scrubbing brush or paint scraper while flushing with water, alternatively use a pressure washer (max 60bars/ 870psi).
  NB: The use of hot water makes the job easier.
• Thoroughly rinse surface with fresh clean water.
• After stripping and rinsing. All porous surfaces must be immediately treated with NET-TROL®* while still wet to neutralise the surface.
  NB: Consult Owatrol for additional information and advice prior to using DILUNETT® on Oak and Chestnut.

Neutralisation:

• Always use NET-TROL®* to neutralise stripped porous and wooden surfaces.

Store unused product in a tightly closed plastic or glass container. DO NOT store product in metal containers.
Keep from freezing and away from high temperatures.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Can be used on most surfaces including wood, plastic, stone, metal and cement
• Should not be used on aluminium
• Perfect for those difficult to strip surfaces and for stripping large areas
• Does not dry out
• Non-flammable and remains active a long time
• Does not attack rubber, gel coats, synthetic coating or plastics
• Has a coverage of 4m2/litre and is suitable for outside use