Cuprinol 5 Star Complete Wood Treatment is an all purpose treatment to protect interior timber.
Cuprinol Wood Treatmet is clear, low odour, water based, and prevents insect attack, re-infestation and fungal decay.
This product is non-returnable.
Approx. Drying time (touch dry)
Approx. Drying Time (recoat)
after previous coat has soaked in
Wood (Interior), Floors (Interior).
Covers up to 3.5 square metres per litre, dries in 48 hours.
General No. of Coats
Eradication of woodworm and prevention of woodworm, wet and dry rot attack: Brush: Apply to achieve a coverage rate of 3.5 to 5 m2/l of timber (typically 2-3 uniform coats). Apply subsequent coats after the previous has soaked in. Dip: Dip for at least 3 minutes. The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appearance is acceptable. Treat all replacement timber. Apply to any surfaces cut after treatment. To ensure thorough protection, treat all surfaces. After full drying most glues, fillers and knotting solutions can be used as normal. Ensure timber is fully dry (allow 3 days) before laying plastic floor tiles, foam or rubber-backed carpets, loft insulation, etc.
After use, remove as much product as possible from equipment before cleaning with water. Do not use or store in extremes of temperature.
Do not use or store in extremes of temperature and protect from frost.
When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.