Cuprinol Wood Preserver Clear

1L covers up to 5m² with 2 coats.

2.5L covers up to 12.5m² with 2 coats.

5L covers up to 25m² with 2 coats.

Coverage can vary depending on application method and the condition and nature of the surface.

Before application remove excessive dirt and soiling, large areas of algae, lichen or fungi using an appropriate fungicidal wash or cleaner designed for the job. Wood that has been wood-stained, painted or vanished should be stripped back to bare wood and treated as bare wood. Do not use this product to treat wood destined for in ground contact use. Ensure that timber used in ground contact has been pre-treated especially for such use.

Apply 2 even coats with a brush. Leave the first coat to soak in before applying the second but reapply before the first is fully dry (typically 2-6 hours). Leave 16 hours for the second coat to dry before painting, staining or vanishing. Do not spray.

After use, remove as much product as possible from equipment before cleaning with water. Do not use or store in extremes of temperature.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Actively prevents rot and decay.
• Colourless preserver for interior and exterior use.
• Use as a basecoat before painting staining or varnishing.