Covers up to 18 square metres per 2.5 litre mix in one coat - 2 coats may be required.

Preparation:

• Surfaces should be clean, dry and free from grease and loose or flaking materials.
• Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead. 

Application:

• The base and activator should be mixed together at a ratio of 4/1 by volume.
• Ensure that the components are completely mixed before application.
• A first coat thinned with 10% water is recommended on bare concrete.
• The mixture must be used within 11/2 hours of mixing.

To Clean Equipment:

• Remove as much product as possible from equipment before cleaning.
• Clean application equipment immediately after use with warm soapy water.
• Rinse thoroughly.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Low odour
• Highly durable
• Semi-gloss
• Water based
• Resistant to chemical attack and abrasion