12m²  per litre

Preparation:

• Ensure surface to be painted is sound, clean, dry and free from grease.
• Remove all loose and defective paint.
• Seal absorbent surfaces with a solution of up to 1 part water to 4 parts Hardwearing Matt.
• Prime bare timber and metal surfaces with the appropriate Leyland Primer.
• Rub down sound previously gloss painted surfaces with fine waterproof abrsive paper and rinse thoroughly before applying a pre-coat of Leyland Trade Acrylic Primer Undercoat.
• Avoid the inhalation of dust.
• Wear a suitable face mask if dry sanding.
• Special precautions should be taken during preparation of pre-1960s paint surfaces over wood and
  metal as they may contain harmful lead.
• For further advice contact Technical Advisory.

Application:

• Stir well before use and apply by brush, roller or spray.
• When using a roller, use a medium pile synthetic type.
• Do not overfill the tray. Ensure roller is loaded evenly.
• If using a brush, load generously.
• Apply liberally and evenly; avoid overspreading.
• Under normal conditions, allow 4 hours before applying a second coat if required.
• Do not apply when air or surface temperature is below 10°C.

• Remove as much product as possible from application equipment before cleaning. 
• Clean equipment immediately after use in warm soapy water and rinse thoroughly. 
• Replace lid firmly. 
• Some local authorities have special facilities for disposal of waste coatings. 
• Do not empty product into drains or watercourses.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• 10x tougher than vinyl matt 
• Moisture and stain resistant 
• Easy to clean