Product Type

Paint

Finish

Gloss

Approx. Drying time (touch dry)

2-4 hours

Approx. Drying Time (recoat)

4 hours

Suitable Surfaces

Concrete, Door Frames, Ferrous Metal, Masonry, Metal (Exterior), Non-Ferrous Metal, Radiators, Brickwork, UPVC, Plastic, Cladding, Fencing, Wood (Interior), Metal (Interior), Wood (Exterior), Tiles, Furniture.

Coverage

Bedec soft MSP gloss colour has a coverage of approximately 13-15 m2/litre.

General No. of Coats

1-2

Application

brush, roller or spray.

Application Instructions

Bedec soft MSP gloss colour can be used over most other old paint, no primer required (unless on mild steel) and no undercoat required. 

• Apply by brush, roller, conventional H.V.L.P or airless spray.
• Stir well and check colour before use.
• Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.
• On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly.
• Do not over spread.

For more information on surface preparation, please see Technical Data Sheet.

Cleaning

Bedec soft MSP gloss colour is non-yellowing and cleans up with water.

Storage

Do not use or store in extremes of temperature and protect from frost.

Disposal

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

Features

• Retains gloss for longer
• Resistant to cracking and flaking
• Alkali resistant
• Resists heat up to 80oC
• Low VOC
• Interior and exterior
• Water-based