Up to 2.5* m² per litre on a smooth surface

Preparation:

-New Surfaces Timber, plywood and MDF:

• All surfaces must be suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied.
• Rub down with a suitable grade of abrasive paper.
• Remove all dust.
• Treat knots with two thin coats of fresh knotting.
• Fill any fixing holes, open joints and shallow surface defects with a proprietary filler.
• Rub down with a suitable grade of abrasive paper.
• Remove all dust.
• Apply one coat of Crown Trade Timonox Upgrade Basecoat as defined in a Fire Test
  Report.

-Unstable surfaces:

• On extremely chalky, powdery or unstable surfaces Crown Trade Stabilising Solution
  should be used. 

-Previously decorated soiled surfaces:

• All surfaces must be suitably dry, and free from anything that will interfere with the
  adhesion of the materials to be applied.
• Remove all loose and failing or suspect paint.
• Feather edges of sound paint.
• Remove all dust.
• Organic growth must be removed and the areas treated with Crown Trade Fungicidal Solution.
• Treat knots with two thin coats of fresh knotting.
• Fill any fixing holes, open joints and shallow surface defects with a proprietary filler.
• Rub down with a suitable grade of abrasive paper.
• Remove all dust.
• Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
• Any glossy or eggshell surfaces should be wet abraded to provide a key.
• Rinse with clean water to remove all residues.
• Allow to dry.
• Spot prime bare areas of bare wood based surfaces, and bring forward with one coat of Crown TradeTimonox Upgrade Basecoat. 

Application:

• Stir well before use.
• Apply by brush, roller or airless spray (thinning may be required).
• For spray application, refer to the Crown Trade Timonox Airless Spray Application Guidelines (Technical Data Sheet).

Please read Technical Data Sheet for more information.

Return surplus material to container. Wash with clean water immediately after use

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Forms part of a system to upgrade existing coatings to class 0
• Must be overcoated, does not provide a durable decorative finish
• No special application method required
• Solvent free