Preparation:

• All surfaces must be clean and dust free.
• All loose or flaking surface coatings should be removed before application.
• Glass, metal and aluminium should be cleaned with a solvent cleaner prior to application for optimum adhesion.

Application & Tools:

• Cut the tip of the cartridge taking care not to damage the thread.
• Apply nozzle and cut cleanly at an angle of 45° with an opening slightly larger than the gap to be sealed.
• Apply using a standard sealant gun.
• Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed.
• Always tool down immediately following application using a spatula or piece of wood wetted with a soap and water solution.
• When applied to wet surfaces tooling down is essential to ensure a proper bond with the surface is formed.
• The product is tack free after 10-15 minutes, and should be allowed to cure for 24 hours before painting.

Cleaning tools:

• For uncured product use Everbuild White Spirit, if cured this should be removed mechanically.

Store in cool (5 - 25°C) dry conditions with good ventilation and away from sources of ignition.

• Can be applied in all weather conditions
• Sticks to wet surfaces
• Permanently flexible
• Can be used in conjunction with bitumen, asphalt, lead and galvanised steel
• Suitable for all roofline applications
• Adheres to problematic surfaces such as bitumen, asphalt, lead and galvanized steel
• Can be used for industrial metal panel bonding and gap filling