Polyvine Tropical Scumble

Approximately 10-20 square metres per litre

Application:

• Ensure that Scumble is well mixed.
• Select base coat colour in vinyl silk emulsion/satin latex or acrylic semi gloss/eggshell.
• Apply base coat and allow to dry for a minimum of 24 hours with ventilation.
• For maximum open time seal with Polyvine Decorators Varnish.
• Colour your Scumble with Polyvine Universal Acrylic Colourant, mixing thoroughly.
• Brush or roller the coloured Scumble liberally over the base coat.
• Create the desired decorative effect by breaking the surface with a crumpled rag, bag, sponge or a Polyvine tool or brush. 

Caution:

• Always test adhesion and the application of the effect on a trial area before starting.
• Low temperature or high humidity increases drying time.
• Air movement is essential for faster drying.
• Coverage/thickness of Scumble will affect drying time.

• Any equipment used can be cleaned using soap and water before the clear coat dries.
• Wipe any excess off surfaces with a damp cloth.
• Any dried deposits will need a paint stripper to remove them.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Can be used for colourwashing, dragging, graining, marbling, frottage or leather effect and stippling
• Work in temperatures above 21°c/70°f, or in lower temperatures
• Water resistant
• For interior and exterior use