Barrettine Wood Protective Treatment

1 litre to 6 sq metres

Can be sprayed with a traditional pump action Garden style sprayer with viton seals. Protective treatment can also be sprayed using an airless sprayer (Wagner or Graco type) ideally using a minimum 1mm flat fan tip nozzle (9 – 11 thou tip). The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions).

Application:

• Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish. (remove and sand down as required).
• Recommend using a biocidal wash such as Barrettine Knockout Mould and Mildew prior to treatment.
• The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.
• Apply by brush, dip, roller or solvent compatible low-pressure sprayer only (not high-pressure & ensure weather conditions are dry and still).

Clean equipment with Barrettine White Spirit.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• For use on most external pretreated timbers; (refer to tin/container)
• Contains film biocide preserver to prevent a surface growth of mould /algae
• Suitable for rough, sawn or smooth timber, but not suitable for garden furniture unless over sealed
• Harmless to plants and pets when dry
• Oil/solvent based for deeper penetration
• Low odour ready to use formulation
• Superb quality water repellent resins
• UV fade resistant colour pigments
• High level, long lasting protection