Blackfriar Fungi Shield is a washable, anti-mould fungacide finish specifically for use in areas susceptible to mould, algae, fungus or bacterial growth.
Can be used on any interior surface above ground.
*Please note: this product is discontinued and is no longer available. It remains on our website for informational purposes only. For similar products check out Zinsser Perma White Satin or Matt.
This product is non-returnable.
Approx. Drying time (touch dry)
Approx. Drying Time (recoat)
Drywall, Walls and Ceilings (Interior), Plaster.
Up to approximately 12-14m2 per litre, per coat, depending upon the nature and absorbency of the surface being painted.
General No. of Coats
brush or roller.
Paint must be stirred well before use and applied using a good synthetic brush or a roller. Do not apply in temperatures below 10°C or in damp conditions.
Immediately after use, clean equipment with warm soapy water and rinse thoroughly.
Do not use or store in extremes of temperature and protect from frost.
When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.