Cuprinol One Coat Sprayable Fence Treatment

Name: Cuprinol One Coat Sprayable Fence Treatment
Brand: Cuprinol
Availability: InStock

From £26.99 inc VAT

Available in 5L only

Deals & Offers

Buy 2 for £48 & FREE Delivery on 5L Ready Mixed*

Cuprinol One Coat Sprayable Fence Treatment is specially formulated to work with Cuprinol paint sprayers to colour and protect rough sawn timber.

One Coat Sprayable can treat each panel in less than 4 minutes, a fraction of the time it would normally take with a brush.

Cuprinol Sprayable Fence Treatment is quick drying, pleasant and provides a professional finish.

Available in 8 ready mixed colours.

This product is non-returnable.

Product Type

Paint

Finish

Matt

Approx. Drying time (touch dry)

6 hours

Approx. Drying Time (recoat)

2-6 hours

Suitable Surfaces

Fencing, Exterior Wood, Wood (Exterior).

Coverage

5L covers up to 15m² with one coat or 5 fence panel sides (6 x 5 feet).

Coverage can vary depending on application method and the condition and nature of the surface.

General No. of Coats

Application

spray.

Application Instructions

Shake the pack thoroughly before use. Final colour will depend upon wood type, previous treatment and the number of coats applied. Apply using the appropriate Cuprinol sprayer for the product. As with any sprayer it may take a couple of minutes to perfect your technique. Ensure you stand at the correct distance with the nozzle 15-30cm (6"-12") from the wood surface. Begin slowly and increase the pace as you get used to spraying. Take care not to spray too quickly as this may result in an uneven finish. Similarly, spraying too slowly will result in excess product being applied causing runs. Should this happen, simply brush into the wood. Avoid spraying surrounding plants, brickwork, glass, PVCu, etc. Overspray can be minimised by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. If applying by brush, apply evenly, avoiding splashing surrounding plants, brickwork, glass, PVCu, etc. Do not apply in temperatures below 5 degrees C, in damp conditions or if rain is likely before the product has dried. Cover any surfaces nearby to protect from overspray. Allow 2-6 hours between coats under normal weather conditions. Where a strong colour change is involved, more coats may be required. Product should only be used on rough sawn timber. If using more than one pack it is advisable to mix them together in a larger container or finish painting in a corner before starting a new can.

Cleaning

When finished, any unused product can be returned to the pack and stored for future use. Clean the Cuprinol Sprayer with water in accordance with the user guide. Do not use or store in extremes of temperature or wet conditions.

Storage

Do not use or store in extremes of temperature and protect from frost.

Disposal

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

Features