Dulux Trade Vinyl Soft Sheen

Up to 16m2 per litre per coat. Minimum 2 coats required.

Application : Brush,roller or spray. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Soft Sheen (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Vinyl Soft Sheen, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job at one time from the same source.

After use, remove as much paint as possible from equipment before cleaning with water.

Do not use or store in extremes of temperature and protect from frost.

When this paint container is empty please ask your stockist about recycling. If you have leftover paint, please dispose of it responsibly.

• Tough, washable finish
• Fashionable mid-sheen finish
• Coverage up to 16m² per litre
• Water-based