Preparation:

• All surfaces must be clean, dry and dust free.
• All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application.
• Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion.
• Porous surfaces may require priming - a small area should be tested first.

Application & Tools:

• Reference should be made to the recommended joint ratios.
• If necessary reduce joint depth using Everbuild Expanding FILL AND FIX Foam, or Joint backer rod.
• Furthermore, ensure that the joint design only permits adhesion to two surfaces, as three sided adhesion will impair flexibility.
• Cut the tip of the cartridge taking care not to damage the thread.
• Apply nozzle and cut cleanly at an angle of 45° with an opening slightly larger than the gap to be sealed.
• Apply using a standard sealant gun.
• Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed.
• Smooth down within 10 minutes of application.
• To ensure a proper bond, always smooth the sealant down using a spatula or piece of wood wetted with a soap and water solution.
• An improved appearance can be achieved by placing masking tape to both sides of the joint and removing within 5 minutes of application.

Store in cool dry conditions between + 5°C and 25°C. 

• Permanently flexible
• Waterproof seal
• Quick-curing – low dirt pick up
• Will not discolour on aging even in humid or damp conditions
• Tested to ISO 8339 and ISO 10590/10563
• Suitable in a variety of colours