Fill and Skim is a ready mixed lightweight plaster for both patching jobs and covering larger areas. Fill and skim is ideal for covering over old textured surfaces. Ideal for trade and DIY use.
Its uses include:
For covering textured paint surfaces and for restoring old pitted/uneven plastered walls/ceilings in just one quick application.
For internal repairs over plaster, wood, brick, stone and rendering.
The ideal choice for electricians, plumbers, joiners and general builders as a one coat patching plaster for small repair jobs, e.g. over recessed cable trunking and around holes in walls where piping/sockets have been installed.
This product is non-returnable.
£27.99inc VAT£27.99
You Save £0.00
Product Type
Other
Cleaning
Application:
Stir EVERBUILD FILL &SKIM to a smooth paste. If product is too dry, add a few drops of water and restir.
Load smoothing blade using a suitable spatula.
Work over no greater than 0.5m² at a time towards centre of area to be coated.
Apply in smooth curves ensuring even pressure and cover area.
Work back with smoothing trowel over any ridges to smooth flat with rest of surface.
Repeat over rest of area, covering 0.5m² at a time and “blending in” each area.
When filling a large surface area, it may not always be possible to achieve a completely level finish. However, EVERBUILD FILL &SKIMis very easy to sand if necessary.
Deep holes up to 25mm can be filled in one application with no need to build up in several layers.
Coverage: Approx 0.75m²/litre at 6mm depth.
Finishing:
EVERBUILD FILL &SKIM can be papered over, or painted with water or oil based paints as soon as the product is dry – approximately 24 hours – depending on depth and drying conditions.
If priming is required, follow paint manufacturers instructions.
Storage
Store in cool dry conditions between +5 and +25°C. Storage outside these parameters will dramatically reduce shelf life. Protect from frost.