Application:

ALWAYS WEAR PROTECTIVE GLOVES.

• Shake can well before use (about 20 times).
• Carefully fix nozzle.
• Do not overtighten or force.
• ALWAYS USE CAN UPSIDE DOWN.
• Only partially fill cavities as the foam will expand to fill the remaining space.
• Any excess foam can be removed whilst still wet with Everbuild® FOAM CLEANER.
• Cured foam must be removed mechanically or use FOAM EATER.
• When used for fixing door frames, supports must be used until the foam is fully cured.

Please note:

• When transported in cars, keep upright and secured in boot, out of direct sunlight.
• When removing cured foam from skin, take care not to damage with abrasives.
• Grease skin with body lotion or similar.
• IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with Everbuild® FOAM CLEANER before the foam has cured.
• Do not push any object into the valve as the contents may explode.

Clean spills immediately with Everbuild® FOAM CLEANER

• Store upright between 10°C and 20°C.
• Pressurized container.
• Protect from sunlight and do not expose to temperatures above 50°C.
• Do not pierce or burn the can even after use.
• Store as flammable liquid.
• Note: Elevated temperatures will reduce shelf life dramatically.

• Quick-setting – can be cut, sawn or plastered in 1 hour
• Fills irregular and broad gaps where most conventional fillers would fail
• Expands up to 150% its original volume
• Insulating and soundproofing properties
• Cans are fully litho printed for effective display
• Gloves included in the cap

Uses:
Filling:

• Gaps around pipe entries through walls
• Gaps around window frames, door frames
• Electrical wire chasing prior to plastering
• Deep joints prior to applying sealant or plaster
• Irregular gaps in stone, brick, concrete or plaster

Fixing:

• Door frames
• Timber structures
• Window sills and thresholds
• Window frames

Insulating:

• Behind cladding to exterior walls
• Behind soffit and barge boards