Stainblock is a spray applied heavily pigmented white paint which permanently prevents existing stains from water, mould, rust, nicotine, grease, soot, crayon showing through subsequent coatings. Quick drying, overcoat in 15 mins.
This product is non-returnable.
Don't Miss Out
5% Off When You Buy 2
10% Off When You Buy 3
You Save £0.00
Approx. Drying Time (recoat)
Ceilings, Wood (Interior), Walls and Ceilings (Interior), Metal (Interior), Furniture.
General No. of Coats
If stain is due to water leak or penetrating damp, ensure the source of the stain is cured prior to application.
Where patches of mould have grown, wash areas first with 404 Fungicidal Wash and allow to dry.
Remove rust and soot with a wire brush, wash down areas and allow to dry.
Application & Tools:
Shake the can until a rattling noise is heard then shake for a further 1-2 minutes to mix the paint.
Spray EVERBUILD® Stain Block onto the affected area from a distance of 20-30cm until stain is completely covered.
Allow to dry for 15 minutes before covering.
If area is to be overcoated with a solvent based paint, first apply a water based primer to ensure compatibility with EVERBUILD® Stain Block.
Use only as directed.
Do not use on bitumen.
Always test a small inconspicuous area prior to full application.
It is users responsibility to determine suitability for use.
If in doubt please contact technical services for advice.
Do not use or store in extremes of temperature and protect from frost.
When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.
Easy application aerosol formula.
Works on most types household/commercial surfaces.
Heavily pigmented formula for quick easy coverage.