Coverage is 12m2 per litre. 

New and Unpainted Wood Preparation:

• Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination.
• Fill any cracks, holes and open joints with an appropriate filler.
• To improve the paint's adhesion, lightly sand the surface.
• Apply a diluted coat of Farrow & Ball Wood Primer & Undercoat (20 % water) in the correct colour tone for your top coat, followed by one full (undiluted) coat.
• Allow a minimum of 4 hours drying time between coats.
• Apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Previously Painted Wood Preparation:

• Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination.
• Remove any areas of old paint which are peeling or blistering as flaking or peeling can occur if you paint over weak paint layers.
• Blend and "feather? the edges of areas of old paint, as this helps to smooth out the surface.
• Fill any cracks, holes and open joints with an appropriate filler.
• Lightly sand the surface to improve paint adhesion.
• Apply one coat of Farrow & Ball Wood Primer & Undercoat, in the correct colour tone for your top coat (and allowing a minimum of 4 hours drying time between coats).
• Then apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.

Clean using warm soapy water.

This product is water based and must be protected from frost and extreme temperatures. Use within 6 months of purchase. We accept no responsibility for the deterioration of contents or packaging after this date. 

Do not empty into drains or watercourses. Dispose of contents/container to waste disposal site in accordance with local/national regulations. Contact the local Environmental Department for disposal instructions. Metal containers may be recycled. 

• Waterbased and quick drying
• Durable and flexible
• Eco friendly
• Low odour