Coverage is approx 13m2 per litre per coat and typically requires 2 to 4 coats.

How to Apply Paint to Walls by Brush:

• Stir thoroughly before use.
• Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination.
• Please note that flaking or peeling may occur if you paint over weak paint layers - to avoid this sand back any previous weak paint layers before you start painting.
• Using a fine-tipped synthetic bristled brush, apply the paint in a vertical direction then spread the paint out evenly in a horizontal direction.
• On application of the final coat lay off the paint in a single direction to ensure that any brush marks and brush patterning effects (sometimes visible in certain lighting conditions) are minimised. 

For more information on painting with Soft Distemper, please refer to the Product Advice Sheet.

Clean brushes and equipment in warm soapy water and rinse after.

This product is water based and must be protected from frost and extreme temperatures. Use within 6 months of purchase. We accept no responsibility for the deterioration of contents or packaging after this date. 

Do not empty into drains or watercourses. Dispose of contents/container to waste disposal site in accordance with local/national regulations. Contact the local Environmental Department for disposal instructions. Metal containers may be recycled. 

• Very matt finish - 2% sheen level
• Waterbased and quick dying
• Low odour 
• Eco friendly
• Breathable
• Easily removable for detailing