How to Apply:

• Clean surface by removing all loose paint and rust, dirt, grease and salt.
• Rinse with clean water and allow time to dry.
• Shake container well and pour required amount into a plastic container.
• By brush: apply direct to rusty area, working well into heavily pitted areas, corners and edges.
• Avoid coating onto painted areas.
• Hammerite Kurust will turn blue/black when reacting with rust.
• If it does not change colour in 1 hour re-apply.
• Apply topcoat after 3 hours.
• Do not replace unused Kurust back into the original container.
• Clean container with water.

Hammerite Kurust should be stored in a dry, well-ventilated area. Protect from frost and direct sunlight.

• Can be topcoated after only 3 hours
• No primer or undercoat required
• Simple to apply - no need to rinse off