Approximately 12 square metres per litre depending on the nature and porosity of the surface.

Preparation: 

• Ensure good ventilation during application and drying.
• All surfaces to be painted should be clean, dry and free from loose and flaking material including dirt and grease.
• Prime base surfaces with an appropriate primer.
• Rub down previously glossed painted surfaces with fine waterproof abrasive paper and rinse thoroughly.
• Avoid the inhalation of dust. Wear a sutable face mask if dry sanding.
• Special precautions should be taken during preparation of pre-1960’s paint surfaces as they may contain harmful lead.

Application:

• Apply 2 coats.
• Additional coats may be required on new plaster or where a larger colour change is desired.
• Do not apply in temperatures below 100C or in damp conditions.
• If more than one can of colour is to be used in the same area, intermix before use.

• Remove as much product as possible from application equipment before cleaning.
• Clean immediately after use in warm soapy water and rinse thoroughly.
• Replace lid firmly.
• Some local authorities have special facilities for the disposal of waste coatings.
• Do not empty waste paint into drains or watercourses. 

Do not use or store in extremes of temperature and protect from frost.

To avoid the risk of spillage, always store and transport in a secure upright position. Store away from heat and flame.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Irresistibly smooth finish with high opacity
• Hardy, scrub resistant surface tailor made for busy homes
• Low-odour
• Quick drying
• Yellowing and condensation-resistant application
• Water-based recipe and planet-friendly ingredients