Coverage approx 5-10m2 per litre
Can use a soft brush, stiff bristle/nylon brush or pressure washer. Wear chemical resistant gloves, safety goggles and protective clothing.
Clean all tools used with soap and water.
Net-Trol may dull painted surfaces and some metal fixings if left on to long. Rinse off quickly or wipe with a wet cloth.
Application:
To use Net-Trol on wood:
- First wet the surface with fresh, clean water
- Apply Net-Trol with a synthetic brush or roller (medium or long pile)
- Scrub the surface with a stiff nylon/synthetic brush
- Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water
- Scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar)
- If required repeat procedure
- Allow to dry for 48 hours or until it meets the moisture content required by the chosen finish before finishing
To use Net-Trol on stone or concrete:
- First wet the surface with fresh, clean water
- Apply Net-Trol with a synthetic brush or roller (medium or long pile)
- Scrub the surface with a stiff nylon/synthetic brush
- Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water
- Scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar)
- If required repeat procedure
- Allow to dry until it meets the moisture content required by your chosen finish or sealer
To use Net-Trol on nail stains:
- First clean the surface
- After cleaning wet the surface with fresh clean water
- Apply Net-Trol to the entire surface over and around the nail stain
- Do not rinse until the stain has disappeared
To use Net-Trol on plastic or GRP:
- First wet the surface with fresh clean water
- Apply Net-Trol using a brush
- Leave it to work for 10 minutes
- Scrub the surface with a soft or medium nylon scrubbing brush
- Rinse with large amounts of fresh clean water
To use Net-Trol on rust stains:
- First wet the surface with fresh clean water.
- Apply Net-Trol with a stiff nylon scrubbing brush working it into the rust stain
- Leave to work for 10 minutes
- Scrub surface with stiff nylon scrubbing brush
- Rinse with large amounts of fresh clean water
- Clean Up
After Clean Up:
We recommend protecting and enhancing the natural beauty of your wood with Owatrol penetrating wood finishes.
Things to Remember:
- Shake container thoroughly before use.
- Cover any areas you want to protect.
- Thoroughly wet surrounding plants and shrubs.
- Apply between 5°C and 35°C.
- Do not apply on a hot surface as the product will dry too quickly.
- If cleaning vertical wood, work from bottom to top to avoid streaking