Polyvine Decorators Varnish

15-20 m2/litre

Preparation:

• All surfaces must be clean and free from dust, dirt, oil and contamination. 

Application:

• Ensure the product is well mixed but do not shake.
• Thinly apply 2 to 3 coats of varnish.
• On porous surfaces dilute the first coat with 10% water.
• When using dead flat finish, for a high level of protection and stain resistance, apply 2 coats of satin then 1 coat of dead flat. 

Caution:

• Always test for clarity over dark colours.
• Application over emulsion paint can draw contaminants through the paint film.
• Should not be applied over uncured oil based products.
• Test for compatibility before application.
• Not suitable for exterior bare timber or vinyl wall covering.

• Any equipment used can be cleaned using soap and water before the clear coat dries.
• Wipe any excess off surfaces with a damp cloth.
• Any dried deposits will need a paint stripper to remove them.

Protect from extremes of temperature during storage and application.

Do not empty containers into drains or watercourses.

• Water resistant
• Stain resistant 
• Abraison resistant
• Heat resistant
• UV filter protection
• Quick drying
• Microporous
• Water wash up
• Food and child safe
• Nano technology