Polyvine Stone And Brick Protector

15-20 square metres per litre , depending on the porosity of the material

Preparation:

• Do not use in temperatures below 5°c/40°f or in very high humidity.
• Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller. 

Application:

• Mix well before use. Do not shake.
• For general applications on masonry, brickwork and stone, a single application will be sufficient. 
• Stone and Brick protector should be used as supplied, without dilution, by brush, spray or roller. 

Caution:

• Always test on a trial area before application.
• Apply evenly and do not allow to pool in crevices.
• Test for clarity over dark colours.
• NOTE: A chemical reaction could take place on some substrates such as glass, glazed surfaces, lead or aluminium. Mask these materials before application. In case of contact, rinse thoroughly with water immediately.

• Any equipment used can be cleaned using soap and water before the clear coat dries.
• Wipe any excess off surfaces with a damp cloth.
• Any dried deposits will need a paint stripper to remove them.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Interior and exterior
• Chemical resistant
• Quick drying
• Microporous
• Nano technology
• Water wash up