Rustins Plastic Floor Coating

13-15 sq. m per litre, 1 coat, depending on the absorbency of the wood

Preparation:

• The surface must be clean, smooth, dry and free from wax, dust and contaminants.
• Read the full instructions on the tin.
• Our sheet on renovating floors contains further information.
• Nail holes and small cracks may be filled with Rustins Woodfiller.
• Bare wood may be dyed before coating with Rustins Wood Dye.
• Other brands of dye, stain or paints may be incompatible.
• Do not apply Knotting or Sanding Sealer.

Application:

• Using a large brush or varnish roller, apply evenly and liberally, finishing in the direction of the grain.
• Rustins Plastic Coating Thinners (up to 10%) may be added to aid the application in hot weather.
• No other thinners may be added to the coating.

Coats:

• Two coats are usually sufficient on hardwood floors, but in heavy traffic areas, apply 3 coats.
• Softwoods and cork may require a minimum of 3 coats, depending on the absorbency.
• Commercial premises may require 4 coats.

Clean equipment immediately after use with Rustins Plastic Coating Thinners or Rustins Cellulose Thinners, as once hardened, the coating cannot be removed.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Two part cold cure lacquer
• Use on wood, chipboard, MDF, cork, laminates, slate & stone
• Resistant to heat, solvents & abrasion
• Almost colourless
• Does not yellow or craze with age
• Gloss & satin