Teamac Chlorinated Rubber Paint

Coverage approx 14sq.m/litre. 

Preparation:

• Surfaces to be painted should be free from nibs, cavities, and other imperfections.
• Mould, oil stains, if any, must be removed.
• Moisture content of concrete should be below 14% prior to application of any coating.
• Concrete and render should be treated with Coo-Var Acid Etch prior to painting to remove any dirt and laitance and to create a good "key" for the paint.
• Apply a 10% thinned coat of Teamac Chlorvar to prime and seal the surface prior to applying any unthinned coats.
• Surfaces previously painted with Teamac Chlorvar and that are in good condition can be scrubbed clean and the surface roughened to help adhesion of the new coating.
• Old perished Chlorvar coatings should be removed mechanically and treated as new substrate and prepared accordingly.

Application:

• As dictated by normal good painting practice.
• In confined spaces, provide adequate ventilation during application and drying.

Preceding coat:

• Teamac Metaclor Underwater Primer

Subsequent coat:

• Teamac Chlorvar Chlorinated Rubber Paint

Application by brush may require a number of coats to achieve a higher d.f.t. than 25 microns.

Not to be used over conventional paint systems as there may be compatability issues, test first.

Use Chlorvar thinners for thinning and cleaning.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Protection against chemicals
• Can be used for swimming pools, parlours, piping, laundries and marine applications
• Suitable for salt water pools
• Gives protection in moderate to severe corrosive atmospheres
• Interior and exterior use