Farm oxide is general purpose, versatile protection for the maintenance of structural steel, cladding etc. Surfaces must be properly prepared before use. Dries to a durable gloss finish.
This product is non-returnable.
Product Type
Paint
Finish
Gloss
Approx. Drying time (touch dry)
5 Minutes
Approx. Drying Time (recoat)
24 Hours
Suitable Surfaces
Ferrous Metal, Metal (Exterior), Cladding.
Coverage
13 Square Metres Per Litre
General No. of Coats
1-2
Application
brush or roller.
Application Instructions
Preparation:
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
Bare steel should be free from dust, rust and scale.
Blast cleaning to SA 2½ is recommended.
If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
Any oil or grease should be removed before de-rusting.
Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc.
Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
Application:
Mix well before use
As dictated by normal good painting practice, care must be taken during application that the temperature is above the dew point to avoid any contamination.
In confined spaces, provide adequate ventilation during application and drying.
Storage
Do not use or store in extremes of temperature and protect from frost.
Disposal
When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.
Features
Economic protection
Versatile and durable
Can be applied directly to iron or steel (Metal primer is recomended for greater protection)