Teamac Industrial Floor Paint

Coverage approx 13-15 sq. mtrs/litre.  

Preparation:

• All surfaces should be clean, dry, sound and free from contaminants.

Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.

New concrete must be allowed to cure thoroughly which can take up to 3 months.

Other surfaces have to be prepared and primed with the suitable primer for that substrate.

Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.

Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

PRECEDING COAT:
10% thinned Teamac Industrial Floor paint on concrete. Suitable metal or wood primer.

Cleaning solvent: Thinners 14 (10%)

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Easy to use
• General purpose
• Prevents dusting 
• Provides an easy to clean surface
• Suitable for foot and light truck traffic