Teamac Metalastic Metal Paint

14 Square Metres Per Litre

Preparation:

• Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
• Bare steel should be free from dust, rust and scale.
• Blast cleaning to SA 2½ is recommended.
• If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
• Any oil or grease should be removed before de-rusting.
• Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc.
• Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.
• Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.
• Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Application:

• Mix well before use.
• Metalastic paint can be applied with a brush, roller or airless spray.
• As dictated by normal good painting practice, care must be taken during application that the temperature is above the dew point to avoid any contamination.
• In confined spaces, provide adequate ventilation during application and drying.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Multi-surface
• Gloss finish
• Indoor or outdoor
• Economical protection