Product Type

Paint

Finish

Satin

Approx. Drying time (touch dry)

2-4 hours

Approx. Drying Time (recoat)

4 hours

Suitable Surfaces

Concrete, Door Frames, Ferrous Metal, Masonry, Metal (Exterior), Non-Ferrous Metal, Radiators, Brickwork, UPVC, Plastic, Cladding, Fencing, Wood (Interior), Exterior Wood, Metal (Interior), Wood (Exterior), Tiles, Furniture.

Coverage

Bedec soft MSP satin colour has a coverage of approximately 13-15 m2/litre. 

General No. of Coats

1-2

Application

brush.

Application Instructions

Bedec MSP in a satin finish can be used over most other old paint, no primer required (unless on mild steel) and no undercoat required.

• Apply by brush, roller, conventional H.V.L.P or airless spray.
• Stir well and check colour before use.
• Do not apply at air or surface temperatures below 8°C or when likely to rain before the paint has fully dried.
• On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly.
• Do not over spread.

For more information, check out the Technical Data Sheet.

Cleaning

Bedec MSP cleans up with water and is non-yellowing.

Storage

Do not use or store in extremes of temperature and protect from frost.

Disposal

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

Features

• Alkali resistant
• Resists heat up to 80oC
• Water-based
• Interior and exterior use
• Low VOC
• Retains colour for longer
• Resistant to flaking and cracking