Preparation:

• As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating.
• All surfaces must be sound, stable and thoroughly clean and dry.
• Metal surfaces should be wire-brushed to remove rust.
• Where long-term protection is required an initial treatment of a rust-inhibitive product such as red lead or zinc phosphate should be used.
• Loose or blistered paint should be removed, as should tar-based paint systems.
• New galvanised surfaces should be roughened with a wire brush or treated with a proprietary etch primer.
• Porous surfaces should be primed with Black Jack® Bitumen & Flashing Primer.

Application:

• EVERBUILD® BLACK JACK® 901 BLACK BITUMEN PAINT is ready for use and should not be thinned.
• Stir thoroughly before use.
• Apply by brush or spray.
• A minimum of two coats of EVERBUILD® BLACK JACK® 901 BLACK BITUMEN PAINT should be applied.
• The first coat should be allowed to dry (normally 2-4 hours depending on weather conditions) before the second coat is applied.
• Protective coating on concrete, etc: since concrete and some stone surfaces may be porous, an initial primer coat of EVERBUILD® BITUMEN PRIMER should be applied.

Tools may be cleaned by using white spirit. Any spillage should be wiped off surfaces before the bitumen paint has set.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Fast drying paint
• Suitable for use on most common building surfaces
• Resistant to most salt solutions, dilute acids and alkalis, water and alcohol
• Provides a waterproof, weatherproof and corrosion-resistant protective coating